Warning: file_put_contents() [
function.file-put-contents]: Only 0 of 1642 bytes written, possibly out of free disk space in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
262
Notice: can't write:D:/wwwroot/web/honeywell/temp/compiled/goods_related.lbi.php in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
264
Warning: file_put_contents() [
function.file-put-contents]: Only 0 of 807 bytes written, possibly out of free disk space in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
262
Notice: can't write:D:/wwwroot/web/honeywell/temp/compiled/goods_article.lbi.php in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
264
Warning: file_put_contents() [
function.file-put-contents]: Only 0 of 1736 bytes written, possibly out of free disk space in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
262
Notice: can't write:D:/wwwroot/web/honeywell/temp/compiled/goods_attrlinked.lbi.php in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
264
商品描述:
商品属性
霍尼韦尔E121黄铜排气阀图片

E121黄铜排气阀概述
本阀利用浮子随液面升降之力,联动排气装置启闭,达到自动排气的目的。当气体被收集到阀体内时,由于气压作用,阀体内液面下移,浮子随之下降,其降至下限时,联动杠杆系统,打开排气阀阀口,放出带压气体,结果因阀内压力减小液面随之上移,浮子上升,在弹簧弹力作用下,排气口关闭。这样气体就不断被收集、排放、再收集、再排放,完成管道及设备系统的自动排气过程。
E121黄铜排气阀构造
黄铜阀体、阀帽,浮球材质为耐高温的合成材料。阀帽可拆卸。
E121黄铜排气阀特点
1、密封性能卓越,密封圈垫采用耐高温合成橡胶,彻底消除漏水烦恼。
2、排气量大:排气量与系统压力成正比。
3、维护简便:直接旋下阀体清洗、不影响系统正常运行。
E121黄铜排气阀应用范围
供热系统中的散热器、管道及锅炉、空调系统等各种需要使用气水分离的场合。(如右图)
E121黄铜排气阀各种参数


.jpg)
E121黄铜排气阀安装使用注意事项
1、首先将阻断阀垂直安装在管道上,然后用扳手将阀体拧在阻断阀之上,阀体垂直上方应预留10cm以上的维护空间。
2、如需安装在 3/4'' 口径的管道上,只需加装1/2'' 变3/4'' 的补芯。
3、如不排气,请拧下阀体,清除污物后重新安装。
注:附件阻断阀E121-Z 1/2'',黄铜材质,口径为 1/2''。
.jpg)
Warning: file_put_contents() [
function.file-put-contents]: Only 0 of 1517 bytes written, possibly out of free disk space in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
262
Notice: can't write:D:/wwwroot/web/honeywell/temp/compiled/bought_goods.lbi.php in
D:\wwwroot\web\honeywell\includes\cls_template.php on line
264